Brick Paving Side Path
Residential Repair
The old side path surface was removed, the base re-levelled and compacted, and the herringbone brick paving re-laid with a new linear drainage grate set neatly into the run.
Brick Paving Side Path: The Finished Run
Residential Repair
Same job, looking down the completed path towards the rear gate, pavers re-laid tight and level, with the existing garden bed and arch left untouched.
Balcony Floor Resurfacing
Residential Repair
The tired, cracked balcony floor was taken back to a solid base, then re-poured and finished smooth, a fresh new surface without touching the brickwork or breeze-block screen.
Pebblecrete Path Patch
Residential Repair
Rather than replacing the whole path, the failed section was cut out and patched with new exposed aggregate, colour-matched and finished flush with the existing surface and drainage.
Walkway Surface Strip: Removed & Re-Done
Residential Repair
The worn strip across the walkway was stripped back to a clean edge, then re-laid with fresh pebblecrete, a crisp, level repair right across the path.
Patch Repair: Up Close
Residential Repair
Same job, closer in: the worn aggregate was removed back to a clean base near the drain, then patched with colour-matched stone so the repair blends with the older surface.
Concrete Slab: Reinforced & Poured
Residential Repair
Steel mesh set on chairs within the formwork, then poured and finished smooth, a new reinforced slab tied neatly into the house and existing levels.
Pebblecrete Arch: Capital Repair
Residential Repair
A chunk of the arch capital had broken away at the column. The damaged section was built back up and re-finished in fresh pebblecrete, worked in from scaffolding to match the weathered arches either side.
More of Our Work
Finishes, repairs and re-lays from jobs around southern Sydney homes.
Completed pebble-finish surface laid within existing brickwork, a clean, even exposed aggregate.
New concrete area poured, levelled and finished smooth against existing levels and drainage.
Herringbone brick paving re-layed tight and level along a residential side path.
Re-rendered riser and re-exposed pebblecrete tread on a residential step.
Loose pavers re-bedded and re-jointed on a residential path.
Pavers lifted and re-laid level after the bedding was re-compacted.
The fresh mix spread and levelled across the prepared balcony base, pumped up to the job with no mess through the home.
The patched section finished flush, with the drainage grate re-set neatly into the new surface.
The failed section is lifted and the old bedding cleared out, ready for a fresh compacted sand base before re-laying.
Clean pavers staged beside the job, with fresh bedding sand spread and levelled across the opened area.
Pavers re-laid in herringbone, bedded down one by one and checked against the surrounding levels.
Balcony and walkway repairs carried out on occupied apartment blocks, materials pumped up to the job, no dragging gear through your home.
The damaged pebblecrete is removed back to a sound base, here you can see the bare concrete and the drain before the new aggregate goes in.
Edges and ledges are re-rendered and smoothed as part of the same repair, so the whole section finishes neat.
Repairs are cordoned off while they cure, we keep the site clean and safe for you and your family.
Eroded, mossy treads are a slip hazard. The steps are cordoned off and the old surface comes up before the new finish goes on.
The failed surface is broken out back to sound concrete, ready to be re-surfaced and finished.
Pebblecrete steps, columns and arches restored from scaffolding, the same patching and re-finishing skills we bring to paths, balconies and steps.
Pebblecrete isn't just for floors, we patch and re-finish matching ledge bands and wall caps so repairs blend with the original finish.
Need Pebblecrete or Paving Repaired?
Call and tell us what needs attention and your suburb. We'll arrange a site inspection, look at the actual repair required and give you a clear quote on site.